Art nr: 12234
3XMag
Aimpoint® 3XMag
This product is no longer manufactured.
Service is still provided.
Overview
The Aimpoint® 3XMag magnifying module is specially designed for compatibility with Aimpoint sights and for maximum flexibility and better performance in the field.
The Aimpoint® 3XMag magnifying module is a high quality optic that can be used with any Aimpoint sight for extended range target identification and engagement. This high quality accessory gives the shooter the best of both worlds: rapid CQB aiming with an Aimpoint sight, and long range target acquisition in combination with the magnifier. The Aimpoint TwistMount allows this transition to occur effortlessly and in just a matter of seconds.
Mechanical Interface
The recommended mount for the 3XMag is the Aimpoint® TwistMount, which allows for quick attachment on any MIL-Std 1913 Picatinny Rail. Check if you need a spacer for co-witnessing with the Aimpoint sight.
The 3XMag can also be attached to aftermarket “flip to side” mounts.
Discontinued 2018
Launched 2005
Unique features
- Mountable on a rail system behind Aimpoint sights
- Extremely fast and ingenious mounting solution (Twist Mount - Picatinny)
- Can also be mounted with a regular 30 mm ring
- Provides extended range to the operator
- Combines the best of two worlds – CQB & semi-sniping
- Increases confidence, performance, and flexibility
- No influence on point of impact – No need for re-zeroing the sight
- Doubles as handheld magnifying glass monocular.
Technical Specifications
| General Specifications |
|---|
| Item No.: 11324 |
| Optical Specifications |
|---|
| Operating principle: Magnifying device |
| Optical magnification: 3x |
| Aiming dot size: Uses the reticle of the combining sight |
| NVD compatible: Yes |
| Optical coating: Anti-reflex, all surfaces and multi-layer. NVD-Compatible 1, 2, 3 |
| Clear aperture: 20 mm (.79 in) |
| Field of view (FoV): 7° |
| Eye relief: 60-65 mm |
| Transmission: >60% (700–1000 nm) |
| Resolution: >12 (lp/mrad) |
| Dioptric adjustment: Fixed -1.0 D |
| Power Source |
|---|
| Battery type: No power required |
| Physical Specifications |
|---|
| Length sight only: 110 mm (4 5/16") |
| Length conf: 110 mm (4 5/16") |
| Width sight only: 44 mm (1 3/4") |
| Height sight only: 41 mm (1 5/8") |
| Weight sight only (incl battery): 200 g (7,1 oz) including rubber cover |
| Housing material: High Strength Aluminum |
| Housing finish and color: Matte black |
| Material mount and spacer std conf: High Strength Aluminum |
| Surface treatment: Hard anodized, matte, with protective rubber armor cover |
| Height of optical axis - sight and mount: 30 mm (1 3/16") over top surface of Picatinny/Weaver Rail |
| Height of optical axis - sight, mount and low spacer: 39 mm (1 9/16") over top surface of Picatinny/Weaver Rail |
| Environmental Specifications |
|---|
| Temperature range operation: -45°C to 71°C (-49°F to 160°F) |
| Temperature range storage: -51°C to 71°C (-60°F to 160°F) |
| Temperature shock: Operable after a temperature shock between -40⁰C and +55⁰C (-40°F and +131°F) |
| Humidity: Operable during and after Humidity. Limits: RH: 95%, Temp: +20°C to +50°C (+68°F to +122°F), cyclic |
| Submersible: To a depth of 1 m (3 ft.) |
| Shock: Withstands shock. Limits: X-axis: 500 g, 0.7 – 1.1 ms (3 shocks), Y-axis: 40g ±4g, 11 ±1ms (2 shocks in each direction, Z-axis: 40g ±4g, 11 ±1ms (2 shocks in each direction). |
| Vibration: Withstands Vibration. Limits: Vibration, sinusoidal in a frequency range of 10-150 Hz. Frequency: 10-30 Hz, ±1.587 mm, Frequency: 30-150 Hz. 5.75 g, 1 octave/min. Direction: X, Y and Z, Time: 30 min/direction. |
