Find Distributor

Log in

Micro™ T-1 2 MOA - Red dot reflex sight without mount - 1
Micro™ T-1 2 MOA - Red dot reflex sight without mount - 2

Intended use

  • Law Enforcement

    Law Enforcement

  • Military

    Military

  • Shooting Sports

    Shooting Sports

  • Personal Protection

    Personal Protection

  • Secondary Optic

    Secondary Optic

Micro™ T-12 MOA - Red dot reflex sightwithout mount

#200055

  • This product is no longer manufactured.

  • 50,000 hours (over 5 years) of constant operation

  • Submersible to 25 meters (80 feet)

  • Weight 84 g (3.0 oz) sight only

  • 1 Off position, 4 night vision compatible settings, and 8 daylight settings

  • 2 MOA dot size

Product description

The Aimpoint® Micro® series, launched in 2007, created a new category of red dot sights on the market. Compact and lightweight sights with the same quality standard as the larger AIMPOINT sights. The series included three models when launched: MICRO T-1, H-1 and R-1.These models provided shooters active within various application areas with a small, high-performance optic ideal for rifles, carbines, shotguns, sub-machine guns, and handguns, the MICRO sight models quickly became a favorite among enthusiasts as well as professional users.

With the sight model MICRO T-1, Aimpoint introduced an aiming system with equivalent performance and robustness as the full-sized AIMPOINT red dot sights, but in that time very compact size. The sight model was developed as a response to the market's need for smaller and lighter tactical sights. Constructed with hard-anodized aluminum alloy housing, the sight offer optimal protection for electronic and optical components in all types of environmental conditions. Since its debut, the MICRO T-1 has gained worldwide popularity due to its compact size, lightweight design, and robust build quality.

The first MICRO T-1 model featured a 4 MOA dot, the 2 MOA dot version was released a few years later.

The last model within the 1st generation of MICRO series red dot sights was discontinued in 2023.

The rugged and reliable MICRO T-1 adds negligible weight to your equipment.

Versatile mounting solutions - the MICRO series boasts a wide range of mounting solutions compatible with various platforms. The established MICRO mount interface ensures that most mounts can be used across both generations of MICRO sights. However, some mounts are specifically optimized for specific models within the series.

Specifications & documents

  • General specifications
  • Optical Information
  • Power Source Information
  • Mounting specifications
  • Physical Information
  • Technology Information
  • Environmental Information
  • Documents and zeroing targets

General specifications

Size L x W x H
Size L x W x H
62 x 41 x 36 mm / 2.4 x 1.6 x 1.4 in
Weight
Weight
84 g / 3 oz
Dot size
Dot size
2 MOA
Magnification
Magnification
1X - No Magnification
NVD compatible
NVD compatible
Yes
Transmission
Transmission
Average 70% in the range 420 - 900 nm
Eye relief
Eye relief
Unlimited
Mounting solution
Mounting solution
Not Included

Optical Information

Dot size
2 MOA
* MOA (minute of angle)
1 MOA ≈ 30 mm at 100 meters ≈ 1 in at 100 yards
Magnification
1X - No Magnification
NVD compatible
Yes
Transmission
Average 70% in the range 420 - 900 nm
Eye relief
Unlimited
Dot color
Red
Light source wavelength
650 nm red light
Optical coating
Anti-reflex coating all surfaces and multilayer coating objective lens
Parallax
Operationally parallax free - No centering required
Diode
LED (Light Emitting Diode) totally eye safe

Power Source Information

Battery life
50,000 h at daylight setting 8 (15,000 Lux, room temperature)
Battery type
CR2032, 3V, Lithium
Power switch
Rotary Switch
Daylight settings (DL)
8

Mounting specifications

Torque - Mount to sight
0.8 Nm / 7 in-lbs (Torx T10)
Mounting solution
Not Included

Physical Information

Material housing and tube
High Strength Aluminum
Lens covers
Bikini Lens Cover, Rubber, Solid
Adjustment 1 click =
1 click = 13 mm at 100 m / 0.5 in at 100 yds
Color housing
Black
Surface finish housing
Anodized, Semi-matte
Size L x W x H - Sight only
68 x 41 x 36 mm / 2.7 x 1.6 x 1.4 in
Size L x W x H
62 x 41 x 36 mm / 2.4 x 1.6 x 1.4 in
Weight - Optic only
84 g / 3 oz
Weight
84 g / 3 oz

Technology Information

Operating principle
Reflex collimator sight - red dot sight

Environmental Information

Water resistant
25 m / 80 ft
Operating temperature
- 45°C to + 71°C / - 49°F to + 160°F
Storage temperature
- 51°C to + 71°C / - 60°F to + 160°F
Temperature shock
Operable after a temperature shock between - 45°C and + 71°C (- 49°F and + 160°F)
Humidity
Operable during and after Humidity. Limits: RH: 95%, Temp: +20°C to +50°C (+68°F to +122°F), cyclic
Vibration
Withstands Vibration. Limits: Vibration, sinusoidal in a frequency range of 10-150 Hz. Frequency: 10-30 Hz, ±1.587 mm, Frequency: 30-150 Hz. 5.75 g, 1 octave/min. Direction: X, Y and Z, Time: 30 min/direction.
Shock
Operable before and after shock. Limits: X-axis: 500 g, 0.7 – 1.1 ms (3 shocks), Y-axis: 40g ±4g, 11 ±1ms (2 shocks in each direction, Z-axis: 40g ±4g, 11 ±1ms, 2 shocks in each direction.